The QLGEP0523- is a Gigabit Ethernet PoE switch with a total of 5 ports, one of which is available as uplink port and 4 ports for Power over Ethernet. Per PoE port a power supply of up to 30W is possible. The total PoE power budget is 60W. It is an ideal solution when office and home users use a combination of PoE and non-PoE devices.

The QLGEP0523-'s four PoE-enabled ports make it the ideal solution for office users using PoE-enabled devices in the workplace. This can include a mix of PoE IP phones, PoE Wifi APs and PoE IP cams. It is the perfect solution for offices that want to upgrade their office equipment and LAN infrastructure to PoE capability or upgrade with Gigabit performance. The switch automatically detects teh connected IEEE 802.3at/af standard device and provides these devices with power and data over a single cable.

In addition, the QLGEP0523- enables users to provide a stable and reliable high-speed LAN environment with store-and-forward switching architecture, packet error filtering and blockage-free packet forwarding. The 802.3x flow control mechanisms operate in both full and half duplex modes. This device supports the N-Way Auto Negotiation protocol, which automaticallly detects network speed and duplex mode.

For instant fault detection, the QLGEP0523- is equipped with a full range of LEDs to help monitor and troubleshoot the netowork.

Key Features

• IEEE 802.3af/at PoE compliant to simplify deployment and installation
• 10/100/1000Mbps wire speed transmission and reception
• Auto-detection and protetion of non-standard PoE devices
• IEEE 802.3x Flow Control protects against lost packets for reliable data transmission
• Total PoE power budget: 60W, up to 30W per port

TEHNIČKI PODACI

• Standards & Protocols = IEEE 802.3 10-BASE-T, Ethernet IEEE 802.3u 100-BASE-TX, Fast Ethernet IEEE 802.3ab 1000BASE-T, Gigabit Ethernet IEEE 802.3x Full-duplex Flow Control IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3at Power over Ethernet Plus (PoE+)
• Buffer Memory = 1M
• Port = 4 x 10/100/1000Base-TX RJ-45 PoE 1~4 Ports, 1 x 10/100/1000Base-TX RJ-45 Uplink 5 Ports
• Indicator = Power, Active, 10/100/1000M, PoE
• Pin Assignment and Polarity = 1/2(+), 3/6(-)
• Transmission Method = Store-and-Forward
• Power Input = 52VDC @ 1.25A 65W
• Power Output = < 60W
• Power Consumption = < 5W
• Backplane = 10Gbps
• MAC Address Table = 8K
• Data Rate = 10/100/1000Mbps
• PoE = Power Budget: Max. 60W PoE Standard: IEEE 802.3af/at Power over Ethernet / PSE PD classification identity PoE over current protection PoE circuit sorting protection PoE Power Output: Per Port 56V DC, Max. 15.4 watts (IEEE 802.3af) or 30 watts (IEEE 802.3at)
• Jumbo Frames = 9126 bytes
• Operating Temperature = -20~70ºC
• Operating Humidity = 5 ~ 90%
• Storage Temperature = -20~70ºC
• Storage Humidity = 5 ~ 90%
• Dimensions (W x D x H) = 110.20 x 95.70 x 30.00 mm
• Weight = 750g
• MTBF = 30.000 hours
• EMI/EMS = CE, FCC
• Order Information = QLGEP0523-
• Package Contents = QLGEP0523-, Quick Installation Guide, Power adapter with power cord